TMC of America, Inc.

		Model/Size	TMC 60 E-1
A. INJECTION UNIT			A	B	C
1. Screw Diameter		in.	0.98	1.18	1.26
2. Screw Length to Dia. Ratio		L/D	24	20	18.75
3. Injection Pressure-Max		psi	33133	22994	20221
4. Injection Stroke		in.	4.7	4.7	4.7
5. Calculated Injection Volume		cu. in.	3.6	5.13	5.8
6. Injection Capacity (P.S.)		oz.	2	2.7	3.1
7. Plasticizing Capacity*	LS/HT	lb./hr.	33	57.2	70.4
	HS/LT	lb./hr.	41.8	72.6	88
8. Injection Rate at 1000 psi		cu. in./sec.	3.66	5.28	6
9. Standard Screw Speed*	LS/HT	rpm./ft.-lb.	240/397
	HS/LT	rpm./ft.-lb.	300/325
10. Back Pressure Adj. Range		psi	0-1000
11. Nozzle Force		U.S. Ton	6.6
12. Heating Input Power		kw.	5.5
13. Barrel Heating Zones		No.	3 + 1
B. CLAMPING UNIT
14. Clamping Force		U.S. Ton	66
15. Mold Opening Stroke		in.	10.62
16. Open Daylight		in.	23.23
17. Die-height Available		in.	3.93 - 12.60
18. Sizes of Platens (H x W)		in.	19.7 x 19.7
19. Space Between Tie-Bars		in.	12.6 x 12.6
20. Ejector Force		U.S. Ton	4.8
21. Ejector Stroke		in.	3.15
C. GENERAL
22. Pump Motor Power		kw.	11.2
23. Hydraulic System Pressure		psi	2000
24. Total Installed Power		kw.	17.5
25. Maximum Amp. Draw	230 V	A	76.1
	460 V	A	38.1
26. Oil Tank Capacity		G	70
27. Hopper Capacity		lbs.	80
28. Total Machine Weights (approx.)		lbs.	6900
29. Machine Dimensions (L×W×H)		ft.	13.8 × 3.1 × 6.4