Model/Size |
TMC 1000 E-1 |
||
A. INJECTION UNIT |
B | ||
| 1. Screw Diameter | in. | 4.72 | |
| 2. Screw Length to Dia. Ratio | L/D | 20 | |
| 3. Injection Pressure-Max | psi | 23093 | |
| 4. Injection Stroke | in. | 20.5 | |
| 5. Calculated Injection Volume | cu. in. | 358 | |
| 6. Injection Capacity (P.S.) | oz. | 190.76 | |
| 7. Plasticizing
Capacity* |
LS/HT | lb./hr. | 952 |
| HS/LT | lb./hr. | 1285 | |
| 8. Injection Rate at 1000 psi | cu. in./sec. | 53.69 | |
| 9. Standard
Screw Speed* |
LS/HT | rpm./ft.-lb. | 120/6922 |
| HS/LT | rpm./ft.-lb. | 170/4810 | |
| 10. Back Pressure Adj. Range | psi | 0-1000 | |
| 11. Nozzle Force | U.S. Ton | 13.8 | |
| 12. Heating Input Power | kw. | 81 | |
| 13. Barrel Heating Zones | No. | 4 + 1 | |
B. CLAMPING UNIT |
|||
| 14. Clamping Force | U.S. Ton | 1100 | |
| 15. Mold Opening Stroke | in. | 45.28 | |
| 16. Open Daylight | in. | 92.52 | |
| 17. Die-height Available | in. | 23.62 - 47.24 | |
| 18. Sizes of Platens (H x W) | in. | 66.93 × 66.93 | |
| 19. Space Between Tie-Bars | in. | 45.28 × 45.28 | |
| 20. Ejector Force | U.S. Ton | 23.7 | |
| 21. Ejector Stroke | in. | 10.23 | |
C. GENERAL |
|||
| 22. Pump Motor Power | kw. | 112.5 | |
| 23. Hydraulic System Pressure | psi | 2000 | |
| 24. Total Installed Power | kw. | 193.5 | |
| 25.
Maximum Amp. Draw |
|
A | 841.3 |
|
|
A | 420.7 | |
| 26. Oil Tank Capacity | G | 420 | |
| 27. Hopper Capacity | lbs. | 265 | |
| 28. Total Machine
Weights (approx.) |
lbs. | 132000 | |
| 29.
Machine Dimensions (L×W×H) |
ft. | 42.6 × 7.7 × 9.0 | |
